Tag Archives: inspired

Star Wars [inspired] Helmet

Star Wars [inspired] Helmet for a Full Suit.

Another update on the slow progress of this personal, in-house project at IDM Imagineering.

This full suit of Star Wars inspired Helmet for our Stormtrooper Armour is being printed on our Creality CR10-S4 and FormBOT TREX 3d Printers in white, recycled PLA Filament.

The hardest part has been keeping the print as clean and white as possible while we glue and sand and smooth the parts. The 3D prints were fantastically smooth to start with, but some of the curves always suffer from stepping layers in FDM 3D printing.

We have tried to keep to using metal files to sand/smooth, since sand comes off all sandpapers then discolours and embeds itself in the white PLA. A combination of filing, scraping, shaving and 3D-pen welding has gone into achieving a first-look great result!

Next: onto the painting!..

Website: https://www.idmimagineering.co.uk/
Facebook: https://www.facebook.com/idmimagineering
Twitter: @idmimagineering
Instagram: idmimagineering

Harry Potter [inspired] Auror Badge

Auror Badge inspired by Harry Potter for COSplay

This is a 3D Print made in ABS-like Resin from our new resin printers and the detail is quite a change from our FDM printers, as is the time to print and cleanup.

The modelling was done by Adam using Cinema4D and cleanup was done via MeshLAB and processed on Prise Slicer and Chitubox before being output as a 3D Print at 0.05mm layers.

Turning concepts from film and fiction into a reality, into something physical and memorable, is an integral part of what motivates us at IDM using 3D Print, Casting, machining or traditional model making crafts.

We are creative model makers based in Leeds (UK) with over 35 years experience using mixed media.

Website: https://www.idmimagineering.co.uk/
Facebook: https://www.facebook.com/idmimagineering
Twitter: @idmimagineering
Instagram: idmimagineering

Judge Dredd 2012 [inspired] :: 1/6th Scale Armour

1/6th Scale Model Dredd Armour

Using our existing CAD files for these Dredd Armour pieces we scaled them down to 1/6th size and printed them on our *NEW* Resin DLP 3D Printers in black ABS-like resin..

The result was excellent, especially considering that direct scaling down files can leave prints a bit thin in areas. Not this time! 

Some parts are tiny — like the Dredd Gas Grenade arm — and may be better joined to the Grenade body itself. 

What challenges have you faced when using a 1/6th Scale Model? 

Let us know your thoughts by leaving a reply below 👇

Website: https://www.idmimagineering.co.uk/
Facebook: https://www.facebook.com/idmimagineering
Twitter: @idmimagineering
Instagram: idmimagineering